Search all of my sites with Google

Saturday, April 7, 2012

CrazyBike2 Front Hub Modified To Rear Hub with Clamping Dropouts

Last month I changed my 9C front hub into a rear hub, process posted here:
http://www.endless-sphere.com/forums/viewtopic.php?p=551146#p551146
and resulting in finally having front disc brakes plus rear regen brakes, with 26" rear and 24" front.   

One primary reason for the changeover was to get those disc brakes, and another was to be able to use a better suspension fork, without ending up with the death wobble because of the geometry change.

This also let me get much more traction with no wheelspin, and far less tire wear, since there is now enough weight on the motor wheel to keep traction as I startup from a stop, even on poor road surfaces, so far.  Sand and gravel can still wheelspin a bit sometimes, but I am rarely on anything but asphalt.



Then I swapped to 26" front so I could *also* have front rim brakes, as even the disc is not sufficient to be able to lockup the wheel by itself.  While I don't ever want to lock it up, it's good to ahve that much braking power available, so I can stop in less than a  few bike lengths. ;-)  



I also modified the seat, after having planned to do so for nearly a couple years.  Now it is bent forward at the midpoint in back, which makes it more comfortable and lets me relax in it better while riding. 



Overall it is a much better ride than previously.

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Your ride is looking pretty good, too.

    Death wobble--oddly, since I moved the gearbox forward on mine, it tends to enter into a death wobble over about 15mph. I was surprised that my unassisted bike (same make and model as the assisted one) actually seems more stable when I move my weight backward on the bike. It could be the frame isn't stiff enough. I do like the ease of step through frames, though, and also low weight.

    I can relate to wanting good front brakes. I redid my bike rack, which allowed me to move my extra front rim brake back to the rear wheel again. (It used to be mounted behind the fork on the front wheel.)

    ReplyDelete

Alternate suggestions or improvements to anything that's been posted is very welcome, and extreme detail is preferred to brevity.

Keep in mind that unless you leave an email address in your comment, I haven't any way to reply to you except to reply to your comment here. That means if you want a reply, you'll have to come back to *this* blog entry and it's comments to see my reply to you, unless you leave some method of contact within your comment.